Transformer Oil Purification by Fuller’s Earth

CMM-12R

Power transformers are used almost in all branches of the worldwide economy such as industry, housing maintenance, utilities, and agriculture.  Transformers are considered to be the main link of power supply systems.  The reliability of the electric grids and cost-effectiveness of electrical equipment depend on the transformer’s regular and uninterupted operation.

Dielectric transformer oil serves as an insulator and cools the transformer by transferring heat.  The smooth operation of electrical equipment  largely depends on the transformer’s internal condition.

There are such types of transformer oil such as:

  1. raw oil (does not contain any additives), supplied by the manufacturer;
  2. refined oil;
  3. clean and dry transformer oil (raw or refined oils or their mixture after being dried); and
  4. off-specification used oil (does not meet the requirements).

Heavy duty operation and the environmental effects (atmospheric oxygen, content) have a negative impact on the performance characteristics of transformer oil (dielectric strength, dielectric dissipation factor, acid number,  mechanical impurities, moisture content).  Dielectric liquid therfore can age quickly and lose its original resistance to oxidation.  If periodic preventive maintenance measures are not taken, contaminated insulating oil will prevent the smooth operation of the transformer(s).

This problem cannot be solved just by replacing the used oil with fresh oil since there is still between 10 to 15% of used dielectric fluid left in the transformer’s core, windings and soilid insultation.   That contaminated oil is then mixed with the fresh oil thereby reducing its performance characteristics much more rapidly.  The contamination will remain in the solid insulation accelerating the wear and degradation process.

GlobeCore  mobile oil filtration stations, designated as the CMM-R line of equipment are designed to meet the challenges of the modern electric power industry.  GlobeCore units provide an uninterrupted flow during the oil degassings process.

Mobile oil purification stations, connected to the energized transformer provide oil circulation around a closed loop.  Used oil flows to the oil degassing station and then goes back to the transformer after being already filtered.  Due to the constant flow, old oil sludges are washed away and removed from the solid insulation.  As a result, the insulating system is renewed and the service lifeof the transformer is extended.  Companies therefore, may reduce their maintenance and operating costs since there is a reduced need to buy new transformer oil and there is no used oil requiring transportation and disposal.

Another advantage of the GlоbeCоre CMM-R Mobile stations is that oil may be processed while the transformer is energized.  It is the Fuller’s earth that ensures a high-quality regeneration process because of its natural properties (porosity is about 120 m 2 /g) that absorb unwanted contaminants.

GlobeCore Fuller Earth for transformer oil

Fuller’s earth

According to the traditional approach, absorption properties of Fuller’s Earth are restored by burning it at between 538ºC/1000ºF and 649ºС/1200ºF.  But one should note that it will need to be replaced after being burned between 5 and 15 times.

First, GlоbeCоre technology provides for sorbent reactivation directly in the equipment. So there is no unloading and reloading during a processing job. Second, has developed a system that enables the sorbent to be reactivated 300 times.  The sorbent will last between 2 to 5 years depending on the amount of transformer fluide processed and the level of contamination in the oil.

The GlobeCore CMM-R mobile oil recycling stations that regenerate oil with Fuller’s Earth have other advantages that include:

  • portability/mobility
  • reduced manual labor costs.  The mobile oil regeneration station is serviced by one person when several operators are usually required to drain and fill a transformer with oil;
  • no harmful discharges into the air since used oil and sorbent do not require disposal;
  • no risk of oil oxidation since it does not  contact with oxygen during the processing; and
  • a fully automated regeneration process.

Due to the advanced GlоbeCоre regeneration technology, the lifetime of power transformers can be extended up to between 25 and 30 years.  Additionally, GlobeCore mobile oil recondition stations allow for considerable cost savings and good for the environment.

обновлено: October 10, 2016 автором: producing